KTP кристаллы

KTP кристаллы

Show all
Transparency range 350 – 4400 nm
Dimensional tolerances +0/-0.1 mm
Length tolerance ±0.1 mm
Orientation accuracy of cut angle <30 arcmin
Surface quality 20-10 S-D after coating
Wavefront distortion <λ/8 @ 632.8 nm
Parallelism error <20 arcsec
Perpendicularity <5 arcmin
Protective chamfers <0.1 mm x 45°
Material optical damage threshold >0.5 GW/cm2 for 10 ns pulses @ 1064 nm
Выбрать товар
Или напишите просьбу (пожелание)
Внимание! Этот товар вы можете применить для своих нужд.
It exhibits high optical quality, broad transparent range, relatively high effective SHG coefficient (about 3 times higher than that of KDP), rather high optical damage threshold, wide acceptance angle, small walk-off and type I and type II non-critical phase-matching (NCPM) in a wide wavelength range.
KTP is the most commonly used material for frequency doubling of Nd:YAG lasers and other Nd-doped lasers, particularly at the low or medium power density.
We offer Positioning Mount 5APH59T-1 for Nonlinear Crystal Housing.
varna Efficient frequency conversion and Large non-linear optical coefficients
varna Wide transmission region from 350 nm to 4400 nm
varna Wide angular bandwidth and small walk-off angle
varna Broad temperature and spectral bandwidth
varna Low cost compare with BBO and LBO

Закажите товар

Товары на странице страница
Aperture dimensions, mm Length, mm Application Coatings S1/S2, nm/nm Orientation Theta/Phi, deg Delivery Product ID Цена
4 x 4 6 [email protected] 1064+532/1064+532 90/23.5 Request 4-KTP-4406 Запрос REQ
7 x 7 9 [email protected] 1064+532/1064+532 90/23.5 Request 4-KTP-7709 529 €
3 x 3 5 [email protected] 1064+532/1064+532 90/23.5 Request 4-KTP-3305 76 €
3 x 3 10 [email protected] 1064+532/1064+532 90/23.5 From stock 4-KTP-3310 109 €

Индивидуальное применение

Этот товар вы можете применить для своих нужд. Если не находите желаемых параметров, свяжитесь с нами по поводу индивидуального заказа.

Заполните форму

Заказать со склада

Выберите из 5 KTP кристаллы