KDP, DKDP кристаллы

KDP, DKDP кристаллы

Show all
Transparency range 160 – 1800 nm (DKDP)
Dimensional tolerances +0/-0.1 mm
Length tolerance ±0.1 mm
Orientation accuracy of cut angle <30 arcmin
Surface quality 20-10 S-D
Surface flatness <λ/4 @ 632.8 nm
Parallelism error <20 arcsec
Perpendicularity <5 arcmin
Protective chamfers <0.1 mm x 45°
Material optical damage threshold >10 J/cm² for 10 ns pulses @ 1064 nm for KDP, >5 J/cm² for 10 ns pulses @ 1064 nm for DKDP
Выбрать товар
Или напишите просьбу (пожелание)
Внимание! Этот товар вы можете применить для своих нужд.
Crystals are also widely used for electro-optical applications as Q-switches for Nd:YAG, Nd:YLF, Ti:Sapphire and Alexandrite lasers, as well as for Pockels cells. The most commonly used electro-optical crystal is DKDP with a deuteration more than 98%. These crystals are grown by a water-solution method and can be grown up to very large sizes. Therefore, they are as low-cost and large-size finished non-linear components available. For frequency-doubling (SHG) and -tripling (THG) of Nd:YAG laser at 1064 nm, both type I and type II phase-matchings can be employed for Nonlinear single crystals KDP and DKDP. For frequency - quadrupling (4HG, output at 266 nm) of Nd:YAG laser KDP crystal is normally recommended.
We offer large aperture KDP crystals (up to 400x400mm and 10- 50mm length).
varna Good UV transmission
varna High optical damage threshold
varna High birefringence

Закажите товар

Индивидуальное применение

Этот товар вы можете применить для своих нужд. Если не находите желаемых параметров, свяжитесь с нами по поводу индивидуального заказа.

Заполните форму

Заказать со склада

Выберите из 2 KDP, DKDP кристаллы